All information

Tool Holder: Types, Selection Criteria and CNC Machining Application Guide

2026-09-18 14:00

The tool holder acts as the connecting component between the CNC spindle and cutting tool. It directly affects machining accuracy, surface finish and tool life. Proper selection of tool holder type and specifications helps reduce runout and vibration, ensuring stable performance for different CNC machining processes.

1. Main Types of Tool Holders

1.1 CAT Tool Holder

CAT taper holders are widely used in North American CNC machines. They feature steep taper design and rigid clamping. Suitable for general milling, drilling and tapping operations. The drawback is that thermal expansion may reduce contact rigidity under high-speed conditions.

1.2 BT Tool Holder

BT taper tool holders are the most common type on Asian CNC equipment. It combines taper contact and flange contact for good rigidity. Available in BT30, BT40, BT50 sizes. Ideal for medium and heavy cutting, widely adopted in mold processing and metal parts fabrication.

1.3 HSK Tool Holder

HSK is a hollow short taper holder. It achieves dual contact of taper and flange, offering excellent concentricity and high-speed stability. Less thermal deformation at high RPM. It is the preferred choice for high-speed precision milling, aerospace and die machining. The cost is relatively higher than BT and CAT holders.

1.4 ER Collet Chuck

ER collet chuck is a versatile clamping type. It can hold round-shank tools through collets. Easy to install and adjust, good for small-diameter end mills, drills and taps. Widely used for light and medium cutting tasks.

1.5 Hydraulic Shrink Fit Tool Holder

Shrink fit holders use thermal expansion principle to clamp tools. Ultra-low runout, high clamping rigidity and smooth outer contour. Perfect for high-speed precision finishing. Hydraulic tool holders rely on hydraulic pressure for clamping, featuring good damping performance and convenient tool change.

2. Core Selection Criteria

Spindle interface matching is the first rule. Confirm whether the machine uses BT, CAT or HSK standard to avoid installation mismatch.

Consider machining load: Heavy roughing requires high-rigidity BT50 or large-size HSK holders. High-speed finishing needs HSK or shrink fit holders to minimize runout.

Tool shank diameter: Select the correct collet or inner bore size according to cutting tool shank dimension. Avoid using oversized collets to clamp small shanks, which will increase runout error.

Runout requirement: Precision finishing demands runout within 0.002mm at the tool tip. General rough machining can allow larger runout tolerance.

Length selection: Choose the shortest possible holder length that meets machining depth. Longer tool holders tend to produce vibration and deflection.

3. CNC Machining Application

Rough machining: Prioritize BT series tool holders with high rigidity. Strong clamping force can withstand heavy cutting load and reduce chattering.

Precision mold finishing: Adopt HSK or shrink fit tool holders. Low runout guarantees consistent surface quality and dimensional accuracy.

Small hole drilling and tapping: ER collet chucks are flexible for frequent tool changes in multi-process operations.

Aerospace thin-wall part processing: Use hydraulic or shrink fit holders with good vibration damping to prevent workpiece deformation.

4. Common Selection Mistakes

Mistake 1: Only focusing on price while ignoring spindle standard compatibility. Wrong taper will cause clamping failure and safety risks.

Mistake 2: Blindly using long tool holders. Excessive overhang leads to vibration, poor surface finish and broken tools.

Mistake 3: Using one holder for both roughing and finishing. The holder cannot satisfy both heavy cutting and ultra-precision requirements simultaneously.

5. Daily Usage Tips

Clean taper surface and tool shank before installation. Chips and dirt will cause poor contact and increase runout. Check for scratches, corrosion or deformation regularly. Measure runout periodically. Avoid overloading the tool holder beyond its recommended speed and torque range.