Classification and Material Selection of Industrial Cutting Tools for Metal Processing
Metal processing is one of the most fundamental sectors in modern manufacturing, and cutting tools act as the core consumables to complete turning, milling, drilling, sawing and other machining procedures. A reasonable understanding of tool classification and proper material selection directly affect machining accuracy, cutting efficiency, surface finish of workpieces and overall production cost. With various types and complex material properties of industrial cutting tools, mismatched tools will lead to rapid wear, chipping, poor processing quality and frequent downtime. This article systematically classifies mainstream metal cutting tools, analyzes the characteristics of common tool materials, and provides targeted selection advice for different metal workpieces and working conditions.
1. Main Classification of Industrial Metal Cutting Tools
According to machining methods, structural forms and application scenarios, industrial cutting tools for metal processing can be divided into turning tools, milling cutters, drills, saw blades, boring tools and broaches, each with independent functional positioning and usage characteristics.
Turning tools are widely used on lathes for machining outer circles, inner holes, end faces and threads of metal workpieces. They are divided into integral turning tools, indexable insert turning tools and welded turning tools. Featuring simple structure and flexible operation, they are suitable for rough machining, semi-finishing and finishing of various shaft and sleeve parts.
Milling cutters are matched with milling machines and machining centers. With multiple cutting edges, they can complete plane milling, groove milling, contour machining and forming cutting. Common types include end mills, face milling cutters, side milling cutters and forming milling cutters. They are applicable to batch processing of flat parts, mold components and complex profiles, and have high requirements on tool rigidity and wear resistance.
Drilling tools mainly refer to twist drills, center drills and reamers, used for drilling and hole finishing on metal surfaces. Twist drills are the most common type, which can realize one-time hole forming. Reamers are used for secondary finishing to improve hole dimensional accuracy and surface smoothness. These tools need good toughness and chip removal performance to avoid breakage during deep hole processing.
Saw blades include HSS saw blades, carbide-tipped saw blades and abrasive cutting wheels, mainly for cutting off metal bars, pipes and profiles. Different blade structures are selected according to cutting thickness, material hardness and required cutting precision, covering manual cutting, semi-automatic and fully automatic cutting production lines.
Boring tools are applied to expand and finish existing holes, especially for deep holes and large-diameter holes with high precision requirements. Broaches are used for high-efficiency forming machining of inner holes, keyways and special-shaped surfaces, which are mostly used in mass production scenarios.
2. Performance Requirements for Metal Cutting Tool Materials
No matter what type of cutting tool, the material must meet several core performance indicators. First is high hardness and wear resistance. The tool hardness must be far higher than that of the processed metal, so as to resist friction wear during long-term cutting. Second is high red hardness, which means the tool can maintain stable hardness and cutting performance under high temperature generated by high-speed cutting. Third is sufficient strength and toughness, preventing tool chipping, fracture and collapse under cutting impact and vibration. In addition, good thermal conductivity, impact resistance and easy processing performance are also essential auxiliary conditions for qualified tool materials.
3. Introduction to Common Tool Materials and Their Characteristics
3.1 High Speed Steel (HSS)
High speed steel is an alloy steel containing tungsten, chromium, vanadium and other elements. It has excellent toughness, good machinability and moderate hardness. It is not easy to crack or break under impact and vibration, and can be reground repeatedly for reuse. Its red hardness is general, so it is mostly used for medium and low-speed cutting. HSS tools are cost-effective and widely made into twist drills, hand saw blades, conventional turning tools and milling cutters. They are suitable for processing ordinary carbon steel, low-hardness alloy steel and cast iron, and are favored by small and medium-sized processing workshops and maintenance sites.
3.2 Cemented Carbide
Cemented carbide is made by powder metallurgy with tungsten carbide as the main component. It boasts ultra-high hardness, outstanding wear resistance and excellent red hardness, and can work stably under high-speed cutting and high temperature environment. Its cutting efficiency is several times higher than that of HSS tools. The main disadvantage is poor toughness and brittleness, so it is vulnerable to chipping when subjected to severe impact. Cemented carbide is the mainstream material for modern high-efficiency machining tools, commonly used for indexable inserts, carbide saw blades, high-speed milling cutters and turning tools. It is suitable for mass production lines and processing medium and high hardness metal materials.
3.3 Coated Tool Materials
Coated tools take HSS or cemented carbide as the substrate, and attach a layer of hard thin film such as TiN, TiCN and TiAlN on the surface by physical or chemical coating technology. The coating further improves surface hardness, anti-adhesion and oxidation resistance, reduces friction between the tool and workpiece, and greatly extends service life. Coated tools combine the toughness of the substrate and the wear resistance of the coating, and are widely used in high-precision finishing and high-speed cutting of stainless steel, alloy steel and difficult-to-machine materials.
3.4 Ceramic Cutting Tools
Ceramic tools have extremely high hardness, good high-temperature resistance and chemical stability, and are not easy to bond with metal workpieces. They are suitable for high-speed finishing of hardened steel, cast iron and wear-resistant alloys. However, their toughness is poor, and they have strict requirements on cutting stability, so they are mostly used in stable automatic machining equipment, and not recommended for intermittent cutting with large impact.
3.5 Superhard Tool Materials
Superhard materials mainly include cubic boron nitride (CBN) and diamond materials. CBN tools are used for precision machining of quenched steel, high-hardness cast iron and thermal spray coatings. Diamond tools are suitable for processing non-ferrous metals such as aluminum alloy and copper alloy, featuring ultra-high machining precision and surface finish. Such materials are expensive and mainly applied to high-precision machining and special material processing fields.
Chinese