All information

Tool Holder Selection Guide: Precise Matching Based on Tool Types and Machine Models

2026-01-12 14:08

Core Selection Steps (5-Step Process)

Confirm machine tool parameters

Record the spindle interface type (such as BT40, HSK63A) and the maximum spindle speed of the machine tool, which is the primary basis for tool holder selection.

Clarify cutting tool information

Determine the shank type (cylindrical, taper, etc.) and specific diameter of the cutting tool to be used, which determines the clamping structure of the selected tool holder.

Define machining requirements

Confirm the machining type (rough machining or precision machining), key cutting parameters (spindle speed, cutting depth), and the accuracy standard of the final workpiece.

Select tool holder type

Match the tool holder type to the actual scenario: choose ER collet tool holders for general milling, drilling and tapping; choose HSK tool holders for high-speed and high-precision machining; choose hydraulic tool holders for ultra-precision machining scenarios; choose side lock tool holders for heavy cutting processes.

Verify performance parameters

Check the core performance indicators of the selected tool holder, including runout accuracy, dynamic balance grade and clamping range, to ensure that all indicators meet the preset machining requirements.

Common Tool Holder Type Matching Instructions

ER Collet Tool Holder

Core advantages: Strong versatility, low procurement cost, wide clamping range for tools.

Applicable scenarios: General milling, drilling and tapping processes for common materials such as carbon steel, aluminum alloy and engineering plastics.

Matching details: Suitable for cylindrical shank tools of various specifications; applicable to machine tools with BT/DAT/JT spindle interfaces.

HSK Tool Holder

Core advantages: High positioning accuracy, strong clamping rigidity, excellent dynamic balance performance, suitable for high-speed rotation.

Applicable scenarios: High-speed and high-precision machining fields such as aerospace parts processing and precision mold core processing.

Matching details: Compatible with various precision cutting tools; only applicable to machine tools equipped with HSK spindle interfaces (such as HSK63A, HSK32E).

Hydraulic Tool Holder

Core advantages: Ultra-low runout accuracy (≤0.003mm), good vibration damping effect, no damage to the tool shank during clamping.

Applicable scenarios: Ultra-precision processing scenarios such as precision milling, fine boring and micro-part machining with high requirements for workpiece surface quality.

Matching details: Suitable for small-diameter precision cutting tools; applicable to high-precision machining equipment; note that its clamping range is relatively narrow and only matches tools of specific diameters.

Side Lock Tool Holder

Core advantages: Large clamping force, stable clamping effect, not easy to loosen during heavy cutting.

Applicable scenarios: Heavy cutting processes such as rough machining of large structural parts, face milling with large cutting depth and processing of high-hardness materials.

Matching details: Suitable for large-diameter cutting tools such as face mills; applicable to heavy-duty machining centers; not recommended for precision machining due to relatively low positioning accuracy.

Selection Pitfalls & Corresponding Solutions

Pitfall: Blindly pursuing high-precision tool holders

Harm: Unnecessary increase in procurement cost; high-precision tool holders cannot exert their performance advantages in rough machining scenarios, resulting in resource waste.

Solution: Match the performance grade of the tool holder according to the machining requirements—use ordinary ER tool holders for rough machining, and select high-precision hydraulic or HSK tool holders only when precision machining is required.

Pitfall: Ignoring dynamic balance performance in high-speed machining

Harm: Severe spindle vibration during high-speed rotation, which will reduce tool service life, affect workpiece surface quality, and even cause potential safety hazards such as tool breakage.

Solution: For machining scenarios with spindle speed > 15,000 rpm, select tool holders marked with G2.5 or higher dynamic balance grade; conduct professional dynamic balance calibration for the tool holder if necessary.

Pitfall: Using non-matching collets with ER tool holders

Harm: Reduced clamping precision of the tool holder, increased tool runout, which will lead to poor machining accuracy and failure to meet workpiece quality standards.

Solution: Use collets that are completely matched with the brand and model of the tool holder; avoid using worn, deformed or counterfeit collets; replace collets in a timely manner after long-term use.

Key Performance Parameters Check List

Confirm that the tool holder interface is fully compatible with the machine tool spindle model

Confirm that the tool holder clamping range covers the diameter of the cutting tool to be used

For general machining, ensure the tool holder runout accuracy ≤ 0.01mm; for precision machining, ensure runout accuracy ≤ 0.005mm

For high-speed machining, select tool holders with dynamic balance grade G2.5 or higher; for general machining, G6.3 grade is acceptable

Confirm that the applicable speed range of the tool holder matches the maximum spindle speed of the machine tool