Carbide blades play a vital role in industrial production, they are widely used in the cutting of various materials, such as metal, plastic, wood and so on. However, in order to ensure the cutting efficiency and service life of carbide blades, proper maintenance and maintenance is essential. Here are some key tips to help you extend the life of your carbide inserts:

1. ** Correct storage method ** :

Carbide blades should be stored to avoid contact with other metal items to prevent the surface of the blade from being damaged or deformed. It is best to store the blade in a dedicated tool box to protect its surface from the outside environment.

2. ** Regular cleaning ** :

Be sure to clean carbide inserts before and after use. Use special cleaning agents or solvents to clean the oil and metal chips on the surface of the blade to ensure the cutting efficiency and accuracy of the blade.

3. ** Avoid excessive wear ** :

In the cutting process, should avoid using too large cutting speed and feed speed, so as not to cause excessive wear carbide blade. Reasonable selection of cutting parameters can effectively extend the service life of the blade.

4. ** Regular grinding and grinding ** :

After using the carbide blade for a period of time, the cutting edge will wear out, affecting the cutting efficiency and accuracy. Regular grinding or polishing of the blade, restore its cutting performance and accuracy, extend the service life.

5. ** Correct installation and commissioning ** :

When replacing the carbide blade or installing a new blade, ensure that the installation is correct to avoid loosening or dislocation. Before cutting, the tool should also be adjusted to ensure the matching of cutting parameters and processing conditions.

6. ** Regular inspection and maintenance ** :

Regularly check the state of the carbide blade, including the degree of wear of the cutting edge, the deformation of the blade, etc. If any abnormality is found, it should be maintained or replaced in time to ensure processing quality and safe production.

7. ** Avoid overuse ** :

Although the carbide blade has high hardness and good wear resistance, it also has a certain service life. In the process of use, excessive use should be avoided and the new blade should be replaced in time to ensure cutting efficiency and processing quality.

8. Reasonable processing strategy ** :

When cutting, a reasonable processing strategy should be developed according to different materials and processing requirements, including the selection of parameters such as cutting speed, feed speed, cutting depth, etc., in order to give full play to the performance of cemented carbide blades.

To sum up, proper maintenance and maintenance is the key to extending the service life of carbide blades. Through regular cleaning, avoiding excessive wear, regular grinding and grinding, correct installation and commissioning, regular inspection and maintenance, avoiding overuse and developing reasonable processing strategies and other measures, you can maximize the service life of cemented carbide blades and improve processing efficiency and quality.